Festool air-powered eccentric sander LEX 3 150/5

Operating pressure (flow pressure): 6.00 bar
Operating frequency: 20000 min⁻⊃1;
Eccentric movement speed: 10000.00 min⁻⊃1;
Sanding stroke: 5.00 mm
Vibration ah (1-axis): 2.70 m/s⊃2;
Vibration ah (3-axis): 3.90 m/s⊃2;
Air consumption at nominal load: 290 l/min
Sound pressure level: 72.00 dB(A)
Sanding pad Ø: 150.00 mm
Product weight without accessories: 0.80 kg
Transport weight incl. accessories: 1.5 kg
Motor type: Compressed air

Noise and vibration during sanding
measurement uncertainty (noise) K: 3.00 dB
Average value of total vibration ah: 3.90 m/s⊃2;
Measurement uncertainty (vibration) K: 2.00 m/s⊃2;
A-weighted sound pressure level Lp: 72.00 dB(A)
A-weighted sound power level Lw: 83.00 dB(A)

Delivery set:
MULTI-JETSTREAM 2 M8 sanding pad Ø 150 mm (soft W-HT)
bottle of cleaning and lubricating oil LFC 9022 (50 ml)
hex key SW 5

Main applications:
Coarse and intermediate sanding of flat surfaces or curves
Coarse and intermediate sanding of putty, e.g. in a 4-step sanding system
Intermediate sanding of wood, paint and varnish
Pre-sanding of mineral materials

Stops vibration, increases efficiency. The 5 mm stroke air-powered eccentric sander LEX 3 150/5 ensures fast work and high-quality sanding patterns, e.g. for coarse and intermediate sanding of flat surfaces and curves or in the 4-step sanding process of putty.
Weighing only 1 kg, with minimal vibration, pleasantly low operating noise, a powerful and durable motor and ultra-low air consumption, it is suitable for both the automotive industry and the production of kitchen furniture and furniture for intermediate sanding of wood, paint and varnish and pre-sanding of mineral materials.

Extremely durable and long service life
A low-maintenance and durable motor with double-sealed bearings and high speed rigidity ensures only short downtimes and a long service life.

Three functions in one: IAS system
The IAS 3 hose system combines three functions into one hose: air supply, exhaust air return and dust extraction. Sanding dust and exhaust air are kept away from the work surface
away. Thanks to the cleverly designed exhaust air return system, cold air does not escape: hands and wrists stay warm, the work is more comfortable and healthier.

Very handy and comfortable
Precise control and sanding thanks to the device's Softgrip coating.
Well-balanced ergonomics also ensures easier operation.

Low air consumption
Less is more. The LEX 3 150 air consumption is the lowest of all: only approx. 290 l/min. This is about 30% less than with devices from other manufacturers – and saves money.

Highest quality of the surface
The unique sole brake reduces the rotation of the sanding sole and thus prevents the formation of sanding marks when placing it on the surface – less rework and costs.

Reduced need for repair work
The high-quality MULTI-JETSTREAM sanding pad FUSION-TEC works on the principle and is low, thus creating a better surface feel. The risk of material damage and costly rework is significantly reduced.

Lower sanding tool consumption, lower total costs
The patented MULTI-JETSTREAM sanding system is a unique system that works with intake and exhaust air. It creates an air flow that actively transports sanding dust to the nearest suction channel. Result: almost 100% dust extraction ensures consistently strong sanding, maximum surface quality and a significantly longer service life of the Velcro fastener and sanding tool.

Discs of different strengths for every use
Hard, soft, ultra-soft. Festool offers sanding pads with three different degrees of hardness for optimal material and surface-specific applications.

Speed adjustment during sanding
The ergonomic position of the speed preselection allows stepless adjustment with the thumb even during sanding.

Well-readable stroke marking
The sanding stroke is printed as a readable number on the top of the ergonomic safety switch. The safety switch also acts as a sensitive sanding accelerator switch.

Antistatic function
Mobile vacuum cleaners and machines against the formation of static charge when working with the antistatic function.

MULTI-JETSTREAM 2
Sanding with built-in dust extraction. Based on the patented MULTI-JETSTREAM 2 principle.

Vibration stop
Patented VS balancing to ensure optimally smooth work during sanding and thus healthy work.

StickFix STF
Quick closing principle for attaching sanding tools – without glue and clamps – for greater economy.

Quick brake
For safe work when planing, sawing and milling.

IAS 3
The hose system combines compressed air, dust removal and exhaust air.

IAS 3 light
Dust extraction, compressed air with external exhaust air control.