Festool cordless reciprocating saw RSC 18 5,0 EB-Plus

MAIN APPLICATIONS:
Universal sawing in renovation and demolition work
Sawing of different materials (wood, plastic, metal and building materials)
Penetration work of panel material, gypsum board roof and wall and base constructions
Cutting of wooden logs and laths
Correction of window and door frames with door frames and casings
Flat sawing of metal and plastic pipes

The Festool cordless saber saw RSC 18 is strong, fast and extremely durable.
With a brushless EC-TEC motor, switchable pendulum stroke and low vibration, control and speed change are very easy. All the power here is directed to the saw blade, but not to the machine or hands.
You can store the RSC 18 with accessories in the included Systainer - clearly and well protected.
The Festool range has a suitable saw blade for every use - and a dust extraction device helps against dust.

For maximum performance and speed
The high-traction, brushless EC-TEC motor and switchable pendulum stroke ensure maximum sawing performance.

Always adapted to the material
The 2-stage gear speed limit allows the cutting speed to be optimally adapted to the material to be sawn.

Always the right speed
The large speed regulator switch allows the machine to start smoothly and stepless speed adjustment ensures a pleasant sawing feel.

No more burnt fingers
When opening the chuck, the saw blade automatically ejects, so the saw blade can be changed completely touch-free.
Despite the sharp edges, the saw blade can be changed safely, easily and quickly.

40% less vibration
Thanks to the unique vibration reduction system, the machine's vibration is reduced by 40%. Therefore, all the power is directed to the saw blade and does not transfer to the machine or the user's hands. Everyone benefits from this: The work is noticeably less tiring, the life of the saber saw is longer and the work performance is more efficient.

The right saw blade for every material
Whether the material is wood, metal or particularly abrasive and hard materials: The Festool saw blade range has a suitable saw blade for every use.

Goodbye fine dust and sawdust!
The dust extraction device included in the delivery set can be attached to the saw table without tools.
Unpleasant fine dust and sawdust are removed from the place where the waste is generated by means of a vacuum cleaner attached to the work table.

Best visibility
The built-in LED allows the work area to be illuminated in the best way.

Take a break safely
The locking switch prevents the machine from being switched on unintentionally.
When hung on the scaffolding hook, the saber saw is also best protected from falling from the heavens.

Sawing to the edge
The saw blade can be installed with a 180° turn and this allows cuts to be made in the ceiling, wall or floor.
If you want to make flat cuts, flexible saw blades are best suited for this.

To extend the life of the saw blade
To use the saw blade for as long as possible, the work table can be locked in different positions and in this way the different loads on the saw blade can be balanced.

Fully protected
If the RSC 18 is registered within 100 days of purchase under the all-inclusive warranty (festool.de/service/garantie-all-inclusive), the device is fully protected.

Electronic monitoring of coil temperature
Electronic monitoring of the coil temperature protects against motor damage.

Quick brake
For safe operation.

Electronic overload protection
Protects the motor in case of a blocking tool.