Festool guide rail FS 2700/2

Official Festool Dealer
- 100% genuine products
- Manufacturer warranty and service
- Professional consultation
More accessories
Fits these products
Invented by Festool and perfected: guide rails. For cuts and grooves that impress with their precision. For smooth machine operation with the glide strip, and for screw clamps and lever clamps in the groove, or tear-free sawing with the splinter guard. A breakthrough in precision and making work easier since 1964. Guide rails are available in 8 different lengths, from 800 to 5000 mm.
Advantages:
Play-free guidance – you can adjust the guide jaws of the plunge saw without tools so that it fits perfectly on the guide rail. Tear-free cuts – the splinter guard directly at the marking prevents edge tear-out, even when making angled cuts. Precise results – the router guide stop is designed for precise grooves. Quick for diagonal cuts – with the guide rail and combination angle, it is very easy to transfer angles measured from the workpiece or wall
Purpose:Safe and perfectly straight machine guidance. Splinter guard for tear-free sawing. The non-slip backing strip makes it easy to place the rail on smooth materials too. Protects the workpiece surface from damage. An additional groove for accessories enables even more applications. Glide strip for easy movement of the machine on the guide rail
For precise cuts that require no reworking, or for precise grooves made with a router. Precise and safe when used with the combination bevel, glide strip, kickback stop or splinter guard. The ideal addition to the guide rail: the Multifunction Table MFT – versatile in the workshop and practical for installation work.
The glide strip ensures that the machine moves along the guide rail. The kickback stop limits movement or ensures that plunge saws do not kick back when plunging into the workpiece. With the combination bevel and guide rail, angles can be transferred directly and easily to the workpiece without extensive calculations or trial and error. When combined with a jigsaw, precise cuts can be made in wood up to 20 mm thick. For precise and straight grooves, it is recommended to use a plunge router with a stop. Place it directly on the guide rail and rout. The plunge saw's guide jaws can be adjusted on the guide rail without tools. This allows the machine to be guided without play and precise cuts to be made. The non-slip strip holds the rail securely in place while protecting the surface. For even greater support, clamps, FS-Rapid quick clamps and the GECKO lifting handle with two suction cups are available. The rubber lip directly alongside the marking acts as a splinter guard to prevent edges from tearing out – even when making angled cuts. The connector makes it easy to join and align two guide rails. The hose and cable deflector prevents the extraction hose and cable from getting caught on the end of the guide rail.
Length 2700 mm
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
All products come with manufacturer warranty as required by law.
We ship from Estonia






Delivery time depends on stock
This product has no reviews yet. Be the first to rate it.
Product description
Invented by Festool and perfected: guide rails. For cuts and grooves that impress with their precision. For smooth machine operation with the glide strip, and for screw clamps and lever clamps in the groove, or tear-free sawing with the splinter guard. A breakthrough in precision and making work easier since 1964. Guide rails are available in 8 different lengths, from 800 to 5000 mm.
Advantages:
Play-free guidance – you can adjust the guide jaws of the plunge saw without tools so that it fits perfectly on the guide rail. Tear-free cuts – the splinter guard directly at the marking prevents edge tear-out, even when making angled cuts. Precise results – the router guide stop is designed for precise grooves. Quick for diagonal cuts – with the guide rail and combination angle, it is very easy to transfer angles measured from the workpiece or wall
Purpose:Safe and perfectly straight machine guidance. Splinter guard for tear-free sawing. The non-slip backing strip makes it easy to place the rail on smooth materials too. Protects the workpiece surface from damage. An additional groove for accessories enables even more applications. Glide strip for easy movement of the machine on the guide rail
For precise cuts that require no reworking, or for precise grooves made with a router. Precise and safe when used with the combination bevel, glide strip, kickback stop or splinter guard. The ideal addition to the guide rail: the Multifunction Table MFT – versatile in the workshop and practical for installation work.
The glide strip ensures that the machine moves along the guide rail. The kickback stop limits movement or ensures that plunge saws do not kick back when plunging into the workpiece. With the combination bevel and guide rail, angles can be transferred directly and easily to the workpiece without extensive calculations or trial and error. When combined with a jigsaw, precise cuts can be made in wood up to 20 mm thick. For precise and straight grooves, it is recommended to use a plunge router with a stop. Place it directly on the guide rail and rout. The plunge saw's guide jaws can be adjusted on the guide rail without tools. This allows the machine to be guided without play and precise cuts to be made. The non-slip strip holds the rail securely in place while protecting the surface. For even greater support, clamps, FS-Rapid quick clamps and the GECKO lifting handle with two suction cups are available. The rubber lip directly alongside the marking acts as a splinter guard to prevent edges from tearing out – even when making angled cuts. The connector makes it easy to join and align two guide rails. The hose and cable deflector prevents the extraction hose and cable from getting caught on the end of the guide rail.
Technical Specifications
Length 2700 mm
Shipping & Delivery
We ship from Estonia






Delivery time depends on stock
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
All products come with manufacturer warranty as required by law.
Reviews
This product has no reviews yet. Be the first to rate it.

Festool guide rail FS 2700/2
491937



