Festool module edge router MFK 700 EQ/B-Plus

Main applications:
Edge router especially for trimming and rounding overhanging edges
With a unique ball bearing brake ensures ideal streak-free results
It is possible to trim 0–45° sloping edges (depending on the router)

Optimized for milling plastic and veneer edges completely smooth.
Specially developed chip catcher optimizes dust extraction, takes care of streak-free results thanks to the integrated ball bearing brake and helps as a guide aid when smoothing edges at an angle. This way, you are equipped to make perfect edges.

Precise fine adjustment
The milling height can be precisely adjusted in the range of 1/10 mm. An easy-to-use lock prevents the milling table from moving during work.

Universal interface
Various milling table modules can be attached without tools via the integrated interface.

Clean smooth milling
With the edge router S8 HW MFK, edges at an angle can also be trimmed. The chip catcher is designed for this so that it can be used as a guide aid for any edge angle.

Simultaneously flush milling and rounding
The construction of the milling table allows this: In the case of the MFK 700, there is an opening in the support table for the overhanging edge strip. With the right Festool router, edge strips or strips can be milled and rounded evenly.

Router change in seconds
In the case of the MFK 700, changing the router is quick and easy. Apply the spindle lock with the rocker.

Clean and health-saving work
The suction nozzle is integrated directly on the milling table – for optimal handling and a good overview of the workpiece.

Material-specific speed adjustment
Thanks to MMC Electronic, the MFK 700 can quickly adjust the speed according to the material and keep it constant under load. At the same time, monitoring the engine temperature ensures a long service life.

For quick device change
Thanks to the plug it system, the device can be changed quickly – directly from the cable, not from the socket or the vacuum cleaner: one cable for all devices. If the cable breaks, a quick cable change is not a problem.

Antistatic function
Mobile vacuum cleaners and machines with an antistatic function against the formation of static charge during operation.

CLEANTEC
Standard connection (27/36/50 mm) for vacuuming, protects people and the environment.

MMC Electronic Digital
Processor-controlled power electronics "Multi Material Control" with adjustable, constant speed and temperature monitoring for material-appropriate processing.

FastFix
Facilitates the replacement of tools used for milling, sawing, planing, grinding, drilling and screwing.

plug it
Removable, replaceable mains cable with safety lock for quick equipment change.