Festool Sliding Table ST 840 TKS 80

Dimensions length x width: 420.00 x 500.00 mm
Max displacement path: 1250.00 mm
Max cutting length (20 mm cutting height): 840.00 mm

Delivery set:
Slide rule with additional attachment

Simply push large workpieces through the TKS 80 saw blade – and it's done! With the extended guide unit, you can cut large panel workpieces accurately and easily. At the same time, the feed carriage also serves as an additional extension on the left side of the saw table.
The included angle lock with stop allows you to make precise right-angled cuts and easily and accurately adjust any other angles.
The plastic roller feed carriage for convenient guidance of workpieces up to 840 mm for cross cuts with a cutting depth of 20 mm
Creates an additional support surface
Once correctly installed and adjusted, a durable connection with a firm hold is established

The feed carriage makes sawing large workpieces effortless. Thanks to the extended support surface, you can easily guide and saw your panels with precise cross cuts up to 840 mm.
Once it is correctly attached and adjusted to the TKS 80, you can be sure that a durable connection with the machine is guaranteed. Additional support legs ensure a firm hold when processing heavy workpieces.
Repeatedly precise angle cuts are easily achieved with the appropriate angle lock stop. Simply set it in place and then you can saw both precise right angles and angles set according to your own wishes.