Kärcher deep well pump BP 6 Deep Well

Maximum engine power: 1000 W
Maximum current: less than 5000 l/h
Pressure: max. 5.5 bar
Immersion depth: max. 27 m
Minimum diameter of the well pipe: 150 mm
Temperature of the water to be discharged: max. 35 °C
Connection thread: G1
Power cord: 30 m
Voltage: 230 V
Frequency: 50 Hz
Weight without accessories: 8.1 kg
Weight, incl. packaging: 14.7 kg
Dimensions (length x width x height): 105 x 105 x 810 mm

Delivery set:
Hose connection kit with 1" and 3/4" hose clamp
30 m long fastening rope

With the 30 m long connecting cable, the BP 6 Deep Well pump can pump water from deeper wells.
Whether for watering the garden or (with a pressure switch) for pumping water used in the household, by pumping groundwater from the well, you save liters of valuable drinking water.
The pump body and threaded connections are made of stainless steel and are extremely reliable.
The integrated pre-filter and the device's feet protect the pump's intake opening from contamination during and after installation.
The 30 m rope supplied with the device can be attached to the pump to safely lower it into the well.
The on/off switch at the end of the cable allows the pump to be used comfortably and safely.
Thanks to the hose connection kit supplied with the device, both 3/4" and 1" hoses can be effortlessly connected to the pump.
Also includes an integrated check valve.

Stainless steel body and threaded connections
Longer service life and vibration resistance

30 m cable
Safe use even very deep

Includes pump connections and check valve
Quick connection of 3/4" and 1" hoses to the pump.

Feet that facilitate installation
Reliable protection against dirt when lowering the pump into the well and installing it.

On/off switch at the end of the cable
Comfortable and safe use of the pump.

Includes 30 m of fastening rope
For securely attaching the pump.

Integrated pre-filter
Protects the pump from contamination and thus increases its service life and reliability.