Kärcher submersible pump SP 16.000 Flood Box

Maximum engine power: 550 W
Maximum current: 16000 l/h
Temperature of the discharged water: max. 35 °C
Lifting height: 8 m
Pressure: max. 0.8 bar
Blade size: max. 20 mm
Submersion depth: max. 7 m
Min residual water, manually: 25 mm
Remaining water height: 25 mm
Connection thread: G1 1/2
Connection thread on the pressure side: G1/2 internal thread
Power cord: 10 m
Voltage: 230 – 240 V
Frequency: 50 Hz
Weight without accessories: 4.9 kg
Weight, incl. packaging: 8.3 kg
Dimensions (length x width x height): 229 x 238 x 303 mm

Delivery set:
10 m fabric-covered hose (1 ¼")
Stainless steel hose clamp
Plastic box

In case of a flood in the house or basement, it is necessary to act quickly - Kärcher SP 16.000 Flood Box is the ideal solution for large bodies of water.
The box contains all the necessary items for immediate commissioning.
The performance of the powerful dirty water pump SP 16.000 is up to 16,000 l/h.
The SP 16.000 Flood Box is capable of pumping out water with dirt particles up to 20 mm in size.
In case of greater contamination, such as floods, the coarse mesh of the box can be used as an additional pre-filter – thus protecting the pump impeller from clogging. 
The Quick Connect connection thread allows you to quickly and easily connect the 1 1/4" fabric hose included in the set.
As the hose clamp has a wing bolt, the connection takes place without tools.
The 10-meter-long hose is perfect for transporting large bodies of water. To save space, it can be packed and stored in the box.

Ready-to-use submersible pump set
The box contains everything you need to quickly pump out dirty water.

Ceramic seal
For extra long life

Practical plastic box with nets
The pump box can be used both as a carrying case and as an additional pre-filter if the water to be pumped contains a lot of dirt particles.

Adjustable height float switch
Extends the pump's usability, allowing you to set the pump's on and off points, which protects the pump from dry running.

Quick Connect quick connection
Connection thread 1", 1 1/4" and 1 1/2" hoses or G1 connection for quick and easy connection.

Intended for pumping dirty water
For reliable pumping of dirty water, which contains dirt particles up to 20 mm in size.

1 1/4" drain hose
Large diameter ensures a higher flow rate.

Includes a stainless steel hose clamp with a wing bolt
Connecting without tools.

Possibility to fix the float switch
To switch to continuous operation mode.

Comfortable carrying handle
Comfortable to hold and can also be used as a mounting holder.