Kärcher submersible pump SP 17.000 Flat

Kärcher's highest performance submersible pump is capable of pumping up to 17000 liters of clean, up to slightly contaminated water per hour.
Ideal helper for eliminating water collections from swimming pools, drainage pipes or leaks.
In the case of more contaminated water and to protect the pump impeller, it is recommended to use the included stainless steel pre-filter.
The reliable stainless steel body and ring seal make the pump particularly durable.
The submersible pump is equipped with an adjustable level sensor, which can be adjusted continuously. The sensor activates the pump when it comes into contact with water.
The SP 17.00 Flat Sensor pump also has folding support legs, which allow the submersible pump to start even when the water level is only 7 millimeters.
With the switch, the pump can also be permanently switched on in manual mode - both in continuous operation and in automatic mode, the SP 17.000 pumps out all the water depending on the level sensor setting, leaving only a 1 mm thick layer of water on the surface, which is easy to dry with a mop.
In addition, the Quick Connect quick connection makes it easy to attach 1", 1 1/4" and 1 1/2" hoses to the pump.

Ceramic seal
For an extra long service life

Level sensor
For determining infinitely variable on and off points on pumps.

Quick Connect quick connection
Connection thread for quick and easy connection of 1", 1 1/4" and 1 1/2" hoses to the pump.

Folding legs
Switching from normal operating mode to a higher performance mode, until the depth of the remaining water layer is only 1 mm, which is easy to dry with a mop.

Automatic ventilation
The pump starts in manual mode when the water level is 7 cm.

Automatic/manual mode switch
To switch between automatic and manual modes.

Comfortable carrying handle
Comfortable to hold and can also be used as a mounting holder.

Durable and easy-to-attach stainless steel pre-filter
Protects the pump from larger dirt, protecting the pump motor from clogging.