Essve post base B2 90 x 90 x 100 mm, M20, adjustable, hot-dip galvanized

Adjustable post base, type B2 (low) consists of two square plates, one welded M20 bolt and one nut
The base plate is 90 x 90 mm and has a thickness of 6 mm and has 4 x Ø11.0 mm holes in each corner respectively
In the middle of the plate is a welded M20 bolt
The top plate is 80 x 80 mm and has a thickness of 8 mm. It is equipped with 4 x Ø8.5 mm holes
The adjustable post base, type B2 (low) is intended for the base mounting of posts and pillars on concrete or stone surfaces
Adjustable 40 mm, i.e. from 35 to 75 mm from the concrete surface to the bottom edge of the pillar/post