REMS diamond drill Picus SR UDKB Set 62 -82-132 Titan + vacuum cleaner Pull M

Diamond drill REMS Picus SR
Power supply: 230 V, 50–60 Hz
Power: 2200 W
Weight: 6.4 kg (drill), 19.5 kg (stand)
Dimensions: 590×145×110 mm (drill), 360×555×1050 mm (stand)

Electric diamond core drilling machine with speed regulator
For core drilling of concrete and reinforced concrete ≤ Ø up to 162 (200) mm, for core drilling of masonry and other materials ≤ Ø up to 250 mm
For dry and wet drilling, holding by hand or with a drill stand
Drive machine with core drill connection thread UNC 1¼ outside, G ½ inside, maintenance-free 2-stage transmission with friction protection clutch
Stepless electronic speed adjustment from 200 min-1 to 500 min-1 (1st gear) or 500 min-1 to 1200 min-1 (2nd gear) with overheating protection
The electronically installed tacho speed electronics keep the preselected speed constant even under load
Multifunctional electronics with soft start, idle speed limit, overload protection, blocking protection
Locking switch
Safety switch (PRCD)

Vacuum cleaner REMS Pull M
Certified vacuum cleaner and dust extractor for sucking up health-damaging dusts belonging to dust class M1.
Exposure limit value/occupational limit for hazardous substances > 0.1 mg/m3 , permeability ≤ 0.1%.
Antistatic system with electrically conductive suction hose E.
Electronic flow control system, suction hose diameter selector switch, suction hose connection cover.
REMS Pull M with antistatic system: the static charge is diverted to the grounded top of the vacuum cleaner, using electrically conductive metal suction tubes, electrically conductive handle E, electrically conductive suction hose E, electrically conductive suction hose extension E and electrically conductive suction hose connector.