STHOR universal sharpener 150 W 5500 rpm

Voltage: 230 V
Drill diameter: 3–13 mm
Weight: 1.62 kg
Protection class: IP20
Power: 150 W
Electrical insulation class: II
Drill bit tip angle: 118°
Revolutions: 5500 min⁻⊃1;
Frequency: 50 Hz
Sound power level: 94.56 ± 3.0 dB(A)
Sound pressure level: 81.56 ± 3.0 dB(A)
Application: sharpening metal drills or universal drills | sharpening knives | sharpening scissors | sharpening axes

Multipurpose 150 W sharpener for sharpening 3–13 mm metal drill bits, knives, scissors, axes made of steel

User manual (briefly):
Place the sharpener on a flat and hard surface to start working so that all the legs are evenly supported. Use only in a dry environment and keep away from unauthorized persons, especially children.

Sharpening axes, knives and scissors:
wear protective gloves to avoid cutting injuries
choose the slot corresponding to the type of blade to be sharpened
turn on the device and wait until the operating speed is reached

insert the blade into the corresponding slot and move it in the opposite direction to the rotation of the disc (the direction of movement is marked on the body)

during sharpening, press the blade lightly against the disc and repeat the movement several times