YATO cordless impact wrench 1/2" + 1/4" HEX, max 285 Nm

The YATO 18 V cordless impact wrench is designed for tightening and loosening M6–M20 threaded connections.
The tool has a 1/2-inch (12,7 mm) socket mount for using impact sockets, as well as an additional 1/4-inch (6,35 mm) hex adapter for bits and drills.
The powerful motor delivers no-load speeds of up to 3000 p/min, an impact rate of up to 3800 impacts per minute and a maximum torque of 285 Nm.

Operating parameters can be adjusted using the trigger switch, and you can choose between three operating modes: L, M and H. The tool also has an automatic mode that helps handle threaded connections more precisely and reduces the risk of thread damage. When loosening, it helps release tightly fastened connections and may automatically limit the rotation speed once they have loosened. LED lights on the control panel indicate the selected operating mode.

The impact mechanism helps loosen tightly fastened connections and tighten fasteners.
The overload clutch disconnects the drive from the impact shaft when the maximum torque is reached.
When selecting an operating mode, consider the size of the fastener, the type of connection and the required tightening force.

Battery power allows you to work in places without access to mains electricity, making the tool suitable for installation, maintenance, repair and workshop tasks.
Before using the impact wrench, it is recommended to thread the nut or screw by hand for a few turns to avoid damaging the thread.
Only accessories designed for the relevant load should be used for impact work; the 1/4-inch hex adapter is not intended for use under impact loads.