YATO cordless impact wrench 1/2" + 1/4" HEX, max 285 Nm, without battery and charger

The YATO 18 V cordless impact wrench is designed for tightening and loosening M6–M20 threaded connections.
The tool has a 1/2-inch (12,7 mm) drive for impact sockets and an additional 1/4-inch (6,35 mm) hex adapter for bits and drills.
The powerful motor provides a no-load speed of up to 3000 rpm, an impact rate of up to 3800 impacts per minute and a maximum torque of 285 Nm.

Operating parameters can be adjusted using the trigger switch, and you can choose between three operating modes: L, M and H. The tool also has an automatic mode that helps handle threaded connections more precisely and reduces the risk of thread damage. When loosening, it helps release tightly fastened connections and may automatically limit the rotation speed once they are loosened. LED lights on the control panel indicate the selected operating mode.

The impact mechanism helps loosen tightly fastened connections and tighten fasteners.
The overload clutch disconnects the drive from the impact shaft when the maximum torque is reached.
When selecting an operating mode, consider the size of the fastener, the type of connection and the required tightening force.

Battery power allows you to work in places without access to the mains, making the tool suitable for installation, maintenance, repair and workshop tasks.
Before using the impact wrench, it is recommended to turn the nut or screw into the thread by hand for a few turns to prevent thread damage.
For impact work, use only accessories designed for the relevant load; the 1/4-inch hex adapter is not intended for use under impact loads.