YATO indicator screwdriver 70-250 V, SL3.5 x 140 mm

Official YATO Dealer
- 100% genuine products
- Manufacturer warranty
- Professional consultation
Technical Specifications
Field of application: electrical work
Power source: battery
Battery type: 2 × 1.5 V; LR41
Length: 140 mm
Voltage: 1.5–9 V direct current (d.c.)
Tip: SL, 3.5 mm
Voltage – non-contact test: 70–600 V alternating current (a.c.)
Continuity test: 0–50 MΩ
LED indicators: yes
Measured voltage frequency: 50–500 Hz
Voltage – contact test: 70–250 V alternating current (a.c.)
Allows to detect alternating current (AC) voltage, for example, in a household socket or at the ends of wires using two methods: contact and induction methods.
The device also allows you to check the continuity of the cable and the condition of batteries or accumulators. The presence of voltage is indicated by an LED that lights up inside the handle.
FUNCTIONS
AC voltage detection by contact method: 70–250 V
AC voltage detection by induction method: 70–600 V
Battery check by contact method: 1.5–9 V
Cable continuity test by contact method: 0–50 MΩ
CONTACT METHOD
Place the tip on the active part of the circuit. The lighting of the LED indicates the presence of electric current. In this method, it is not recommended to touch the contact on the top of the handle. Touching it does not pose a risk of electric shock, but increases the sensitivity of the tester and may give a false reading.
INDUCTION METHOD
The method allows to detect AC voltage in an insulated wire. To do this, hold the tester by the insulated part of the blade and bring the contact on the top of the handle close to the wire. The lighting of the LED indicates that the wire is energized. The sensitivity can be increased by holding the tester by the uninsulated part of the blade. The method also allows to detect a break in an energized wire "contactlessly" - the tester will no longer indicate voltage at the point of the break.
BATTERY CONDITION CHECK
The tester allows you to check the condition of 1.5–9 V batteries and accumulators. Place the blade on the "+" terminal of the battery, touch the contact on the top of the handle and then the "-" terminal of the battery. The lighting of the LED indicates that the battery or battery pack is charged. This method should not be used to check batteries with a higher voltage or to test batteries connected to a circuit.
CABLE CONTINUITY CHECK
The continuity of the cable is checked by placing the tip on one end of the cable, while holding the contact on the top of the handle and grasping the other end of the cable. The lighting of the LED indicates the continuity of the cable. The continuity of energized wires should not be checked with this method.
Field of application: electrical work
Power source: battery
Battery type: 2 × 1.5 V; LR41
Length: 140 mm
Voltage: 1.5–9 V direct current (d.c.)
Tip: SL, 3.5 mm
Voltage – non-contact test: 70–600 V alternating current (a.c.)
Continuity test: 0–50 MΩ
LED indicators: yes
Measured voltage frequency: 50–500 Hz
Voltage – contact test: 70–250 V alternating current (a.c.)
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
All products come with manufacturer warranty as required by law.
We ship from Estonia






Delivery time depends on stock
This product has no reviews yet. Be the first to rate it.
Product description
Allows to detect alternating current (AC) voltage, for example, in a household socket or at the ends of wires using two methods: contact and induction methods.
The device also allows you to check the continuity of the cable and the condition of batteries or accumulators. The presence of voltage is indicated by an LED that lights up inside the handle.
FUNCTIONS
AC voltage detection by contact method: 70–250 V
AC voltage detection by induction method: 70–600 V
Battery check by contact method: 1.5–9 V
Cable continuity test by contact method: 0–50 MΩ
CONTACT METHOD
Place the tip on the active part of the circuit. The lighting of the LED indicates the presence of electric current. In this method, it is not recommended to touch the contact on the top of the handle. Touching it does not pose a risk of electric shock, but increases the sensitivity of the tester and may give a false reading.
INDUCTION METHOD
The method allows to detect AC voltage in an insulated wire. To do this, hold the tester by the insulated part of the blade and bring the contact on the top of the handle close to the wire. The lighting of the LED indicates that the wire is energized. The sensitivity can be increased by holding the tester by the uninsulated part of the blade. The method also allows to detect a break in an energized wire "contactlessly" - the tester will no longer indicate voltage at the point of the break.
BATTERY CONDITION CHECK
The tester allows you to check the condition of 1.5–9 V batteries and accumulators. Place the blade on the "+" terminal of the battery, touch the contact on the top of the handle and then the "-" terminal of the battery. The lighting of the LED indicates that the battery or battery pack is charged. This method should not be used to check batteries with a higher voltage or to test batteries connected to a circuit.
CABLE CONTINUITY CHECK
The continuity of the cable is checked by placing the tip on one end of the cable, while holding the contact on the top of the handle and grasping the other end of the cable. The lighting of the LED indicates the continuity of the cable. The continuity of energized wires should not be checked with this method.
Shipping & Delivery
We ship from Estonia






Delivery time depends on stock
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
All products come with manufacturer warranty as required by law.
Reviews
This product has no reviews yet. Be the first to rate it.

YATO indicator screwdriver 70-250 V, SL3.5 x 140 mm
YT-2864