YATO LCR measuring tweezers 10 mΩ–10 MΩ, 1 pF–20 mF, 10 µH–60 H

Official YATO Dealer
- 100% genuine products
- Manufacturer warranty
- Professional consultation
Technical Specifications
Dimensions: 146 x 30 x 18 mm
Material: ABS
Application: rapid assessment of component condition without disassembly and diagnostics of electronic systems during routine maintenance
Operating temperature range: 5–35 ˚C
Storage temperature: −10 ~ +50 ˚C
Weight: 37 g
Protection rating: IP20
Battery capacity: 500 mAh
Data hold on display (Data Hold): yes
Functions: ESR (capacitor resistance), dissipation factor (energy loss in a capacitor), Q factor
Operating relative humidity Rh: <75 %
Low battery indicator: yes
Battery voltage: 3.7 V DC
Battery type: Li-Po
Charger type: USB Type-C
Resistance: 10 mΩ–10 MΩ
Diode test: yes
Capacitance: 1 pF–20 mF
Adjustable display: OLED
Sampling rate: once per second
Automatic measurement range selection: yes
Audible signal: yes
Display range: 9999
Automatic shut-off: 5–120 min
Measurement category: CAT II
Charger included: no
Measurement voltage: 0.3 V, 0.6 V
Measurement frequency: 100, 1000, 10 000 Hz
Inductance measurement: 10 µH–60 H
Input voltage: 4.2 V DC
Storage relative humidity: <75 %
Diode test voltage: up to 0.6 V
Automatic inductance measurement range: 5 μH–60 H
Automatic capacitance measurement range: 50 pF–5 mF
Inductance measurement accuracy: 10 μH–1 mH: 2 % ± 5 at 100 Hz; 0.5 % ± 5 at 1 kHz and 10 kHz. 1 mH–1 H: 2 % ± 5 at all three frequencies. 1 H–60 H: 5 % ± 5 at 100 Hz and 1 kHz.
Capacitance measurement accuracy: 1 nF–1 μF: 2 % ± 5 at 100 Hz; 0.5 % ± 5 at 1 kHz and 10 kHz. 1 μF–1 mF: 2 % ± 5 at all three frequencies. 1 mF–20 mF: 5 % ± 5 at 100 Hz and 1 kHz.
Resistance measurement accuracy: 1 mΩ–1
- Ω:
- 3 % ± 5 at all three frequencies. 1 Ω–1 kΩ: 1 % ± 5 at 100 Hz
- 0.5 % ± 5 at 1 kHz and 10 kHz. 1 kΩ–1
- MΩ:
- 1 % ± 5 at 100 Hz
- 0.5 % ± 5 at 1 kHz
- 1 % ± 5 at 10 kHz. 1 MΩ–10
- MΩ: 5 % ± 5 at 100 Hz and 1 kHz
YATO LCR measuring tweezers are designed for testing SMD and through-hole components, and measure resistance in the range of 10 mΩ–10 MΩ, capacitance from 1 pF–20 mF and inductance from 10 µH–60 H.
Components can be tested without desoldering them from the circuit board, simplifying the diagnosis of electronic devices and helping to reduce the risk of damage during maintenance.
The lightweight ABS housing and compact design are suitable for use at a maintenance station, in a workshop and for field work.
Measurement and diagnostics
The OLED display shows measurement results in real time.
The device automatically detects the component type and selects the appropriate measurement mode.
If necessary, the component and measurement range can be selected manually.
Automatic range selection and the DATA HOLD function, which keeps the result on the display, support quick component testing.
A diode test with a voltage of up to 0.6 V can also be performed.
Additional functions allow you to measure a capacitor's ESR (equivalent series resistance) and assess its dissipation factor, or energy loss.
The Q factor can be measured for coils.
The measurement frequency can be set to 100, 1000 or 10 000 Hz, and the measurement voltage to 0.3 or 0.6 V.
The device has a low battery indicator and a 3.7 V, 500 mAh Li-Po battery, which is charged via the USB-C port.
The automatic shut-off time can be set to 5–120 minutes, or this function can be disabled.
The USB-C charger is not included.
The set includes pairs of straight and curved measuring probe tips, a USB-C–USB-A cable and a zippered pouch.
Dimensions: 146 x 30 x 18 mm
Material: ABS
Application: rapid assessment of component condition without disassembly and diagnostics of electronic systems during routine maintenance
Operating temperature range: 5–35 ˚C
Storage temperature: −10 ~ +50 ˚C
Weight: 37 g
Protection rating: IP20
Battery capacity: 500 mAh
Data hold on display (Data Hold): yes
Functions: ESR (capacitor resistance), dissipation factor (energy loss in a capacitor), Q factor
Operating relative humidity Rh: <75 %
Low battery indicator: yes
Battery voltage: 3.7 V DC
Battery type: Li-Po
Charger type: USB Type-C
Resistance: 10 mΩ–10 MΩ
Diode test: yes
Capacitance: 1 pF–20 mF
Adjustable display: OLED
Sampling rate: once per second
Automatic measurement range selection: yes
Audible signal: yes
Display range: 9999
Automatic shut-off: 5–120 min
Measurement category: CAT II
Charger included: no
Measurement voltage: 0.3 V, 0.6 V
Measurement frequency: 100, 1000, 10 000 Hz
Inductance measurement: 10 µH–60 H
Input voltage: 4.2 V DC
Storage relative humidity: <75 %
Diode test voltage: up to 0.6 V
Automatic inductance measurement range: 5 μH–60 H
Automatic capacitance measurement range: 50 pF–5 mF
Inductance measurement accuracy: 10 μH–1 mH: 2 % ± 5 at 100 Hz; 0.5 % ± 5 at 1 kHz and 10 kHz. 1 mH–1 H: 2 % ± 5 at all three frequencies. 1 H–60 H: 5 % ± 5 at 100 Hz and 1 kHz.
Capacitance measurement accuracy: 1 nF–1 μF: 2 % ± 5 at 100 Hz; 0.5 % ± 5 at 1 kHz and 10 kHz. 1 μF–1 mF: 2 % ± 5 at all three frequencies. 1 mF–20 mF: 5 % ± 5 at 100 Hz and 1 kHz.
Resistance measurement accuracy: 1 mΩ–1
- Ω:
- 3 % ± 5 at all three frequencies. 1 Ω–1 kΩ: 1 % ± 5 at 100 Hz
- 0.5 % ± 5 at 1 kHz and 10 kHz. 1 kΩ–1
- MΩ:
- 1 % ± 5 at 100 Hz
- 0.5 % ± 5 at 1 kHz
- 1 % ± 5 at 10 kHz. 1 MΩ–10
- MΩ: 5 % ± 5 at 100 Hz and 1 kHz
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
All products come with manufacturer warranty as required by law.
We ship from Estonia






Delivery time depends on stock
This product has no reviews yet. Be the first to rate it.
Product description
YATO LCR measuring tweezers are designed for testing SMD and through-hole components, and measure resistance in the range of 10 mΩ–10 MΩ, capacitance from 1 pF–20 mF and inductance from 10 µH–60 H.
Components can be tested without desoldering them from the circuit board, simplifying the diagnosis of electronic devices and helping to reduce the risk of damage during maintenance.
The lightweight ABS housing and compact design are suitable for use at a maintenance station, in a workshop and for field work.
Measurement and diagnostics
The OLED display shows measurement results in real time.
The device automatically detects the component type and selects the appropriate measurement mode.
If necessary, the component and measurement range can be selected manually.
Automatic range selection and the DATA HOLD function, which keeps the result on the display, support quick component testing.
A diode test with a voltage of up to 0.6 V can also be performed.
Additional functions allow you to measure a capacitor's ESR (equivalent series resistance) and assess its dissipation factor, or energy loss.
The Q factor can be measured for coils.
The measurement frequency can be set to 100, 1000 or 10 000 Hz, and the measurement voltage to 0.3 or 0.6 V.
The device has a low battery indicator and a 3.7 V, 500 mAh Li-Po battery, which is charged via the USB-C port.
The automatic shut-off time can be set to 5–120 minutes, or this function can be disabled.
The USB-C charger is not included.
The set includes pairs of straight and curved measuring probe tips, a USB-C–USB-A cable and a zippered pouch.
Shipping & Delivery
We ship from Estonia






Delivery time depends on stock
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
All products come with manufacturer warranty as required by law.
Reviews
This product has no reviews yet. Be the first to rate it.

YATO LCR measuring tweezers 10 mΩ–10 MΩ, 1 pF–20 mF, 10 µH–60 H
YT-73074