YATO multimeter TRUE RMS LCD 4000

Universal multimeter with TRUE RMS function and automatic range selection
A compact measuring device that allows for both basic and more complex measurements of electrical quantities.
Equipped with a large backlit LCD screen and a fast and accurate measuring system.
Durable ABS housing with a red PVC protective cover reduces damage from drops and, thanks to the non-slip surface, also the risk of slipping from the hand.

AC voltage measurement: 0–600 V AC, TRUE RMS (40–1000 Hz)
DC voltage measurement: 0–600 V DC
AC current measurement: 0–10 A AC, TRUE RMS (40–1000 Hz)
DC current measurement: 0–10 A DC
Resistance measurement: 0–40 MΩ
Diode test: IF 0.3 mA, UR 2.3 V
Circuit continuity test: 0–50 Ω

Additional measurements:
Frequency measurement: 0–3 MHz
Non-contact AC voltage detection: NCV

Measurement accuracy (example):
AC voltage 235 V → ±(1% + 3 digits) → actual result: 235 ± 2.65 V
DC voltage 12 V → actual result: 12 ± 0.09 V
AC current 8 A → actual result: 8 ± 0.15 A

Functions:
TRUE RMS – displays the actual RMS value of AC voltage/current even with distorted waveforms (square, triangle, harmonics).
NCV – non-contact AC voltage detection by inductive method.
AUTO – automatic range selection. The device always starts in AUTO mode.
SEL – changing the measurement mode (e.g., AC → DC).
HOLD – keeps the currently measured value on the screen.

Additional features:
LCD screen, maximum displayed value: 3999
screen backlight
audible signal on circuit continuity test (below 50 Ω)
automatic switching from diode test to continuity test when resistance < 50 Ω
measuring probe length: 12 cm, total length with cable 80 cm
cable diameter with insulation: 3 mm, insulation: PVC
overload protection design
automatic shutdown after 15 minutes, can be disabled
built-in LED on the back of the housing to illuminate the workplace
low battery indicator
power supply: 2 × 1.5 V (AA) batteries