YATO pneumatic impact wrench 1/2" 1100 Nm

Type: pneumatic impact wrench
Drive: 1/2" (12.7 mm)
Maximum bolt size: M16
Impact mechanism: Jumbo Hammer
Working torque: 630 Nm
Maximum torque: 850 Nm
Maximum breakaway torque: 1100–1200 Nm
No-load speed: 9000 rpm
Working pressure: 0.63 MPa
Air consumption: 142 l/min
Air connection: 1/4" NPT
Recommended hose diameter: 10 mm
Total length: 137.3 mm
Net weight: 1.3 kg
Housing: composite material

The professional 1/2" pneumatic impact wrench YT-09516 is designed for intensive use in car repair shops, tire shops, and for the maintenance of passenger and commercial vehicles.
Compact design, high torque, and an efficient Jumbo Hammer type impact mechanism ensure effective tightening and loosening of threaded connections even in difficult working conditions.

The tool is ideal for servicing wheels, suspension components, brake systems, and other high-load bolt connections.
A lightweight composite housing improves ease of use and reduces fatigue during prolonged use.

1/2" (12.7 mm) drive – the standard 1/2" mount allows the use of a wide range of impact sockets
High working torque and efficient loosening – a working torque of 630 Nm ensures correct tightening of connections, and a maximum torque of 850 Nm allows for loosening tightly seized bolts
Maximum loosening torque of 1100–1200 Nm increases work efficiency for corroded and tightly seized connections
Jumbo Hammer impact mechanism – ensures high power transfer efficiency, stable operation under high load, and good durability during continuous use
High rotation speed – 9000 rpm allows for fast work and reduces maintenance time
Lightweight composite housing – reduces the weight of the tool while maintaining good resistance to mechanical damage
Low weight – only 1.3 kg, which improves ergonomics and work precision
Compact design – a total length of 137.3 mm allows working in tight spaces, such as the engine compartment or near the suspension
Standard pneumatic connection – the 1/4" NPT air connection is compatible with standard workshop systems; a recommended hose inner diameter is 10 mm
At a working pressure of 0.63 MPa, the tool achieves optimal performance with an air consumption of approximately 142 l/min