YATO pressure switch 0,5–6 bar
Official YATO Dealer
- 100% genuine products
- Manufacturer warranty
- Professional consultation
Technical Specifications
Material: PP
Application: for automatic control of water pumps
Type: PC-58P
Weight: 1 kg
Voltage: 220–240 V AC
Maximum water temperature: 60 °C
Cable length: 1 m (input) | 0,5 m (output)
Protection rating: IP65
Display type: LCD
Frequency: 50/60 Hz
Maximum operating pressure: 10 bar
Automatic on/off: yes
Maximum current: 16 A
Maximum power: 2200 W
Water outlet diameter: 1″ (25,0 mm)
Ambient temperature: 5–40 °C
Start pressure: 0,5–6 bar
Stop pressure: 0,8–9,8 bar
Electronic pressure regulation: yes
Dry-run protection: yes
YATO electronic pressure switch 0,5–6 bar 2200 W controls the operation of the water pump, monitors the system’s water pressure, and automatically switches the pump on or off when water demand changes. Electronic pressure regulation helps maintain pressure in the system.
The LCD display shows the current pressure, set pressure, and operating mode. The pump can be started with the START button, and the set pressure values are retained in the event of a power outage.
Dry-run protection helps prevent the pump from operating without water. The device is intended for clean water; iron content and dirt may damage it, so installing a filter on the pump’s suction side is recommended.
Install the pressure switch vertically between the pump and the first water outlet, following the direction of water flow marked on the device; a check valve must be fitted at the pump inlet. Use the device at less than 70% relative humidity and protected from direct precipitation. For storage, empty and dry the device.
Material: PP
Application: for automatic control of water pumps
Type: PC-58P
Weight: 1 kg
Voltage: 220–240 V AC
Maximum water temperature: 60 °C
Cable length: 1 m (input) | 0,5 m (output)
Protection rating: IP65
Display type: LCD
Frequency: 50/60 Hz
Maximum operating pressure: 10 bar
Automatic on/off: yes
Maximum current: 16 A
Maximum power: 2200 W
Water outlet diameter: 1″ (25,0 mm)
Ambient temperature: 5–40 °C
Start pressure: 0,5–6 bar
Stop pressure: 0,8–9,8 bar
Electronic pressure regulation: yes
Dry-run protection: yes
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
All products come with manufacturer warranty as required by law.
We ship from Estonia
Delivery time depends on stock
This product has no reviews yet. Be the first to rate it.
Product description
YATO electronic pressure switch 0,5–6 bar 2200 W controls the operation of the water pump, monitors the system’s water pressure, and automatically switches the pump on or off when water demand changes. Electronic pressure regulation helps maintain pressure in the system.
The LCD display shows the current pressure, set pressure, and operating mode. The pump can be started with the START button, and the set pressure values are retained in the event of a power outage.
Dry-run protection helps prevent the pump from operating without water. The device is intended for clean water; iron content and dirt may damage it, so installing a filter on the pump’s suction side is recommended.
Install the pressure switch vertically between the pump and the first water outlet, following the direction of water flow marked on the device; a check valve must be fitted at the pump inlet. Use the device at less than 70% relative humidity and protected from direct precipitation. For storage, empty and dry the device.
Shipping & Delivery
We ship from Estonia
Delivery time depends on stock
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
All products come with manufacturer warranty as required by law.
Reviews
This product has no reviews yet. Be the first to rate it.
YATO pressure switch 0,5–6 bar
YT-85392